/*
* This file is part of Betaflight.
*
* Betaflight is free software. You can redistribute this software
* and/or modify this software under the terms of the GNU General
* Public License as published by the Free Software Foundation,
* either version 3 of the License, or (at your option) any later
* version.
*
* Betaflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this software.
*
* If not, see <http://www.gnu.org/licenses/>.
*/
/*
SUPPORTED TARGET - THANK YOU
REFERENCE: sha256_a4b8f8deda6801e346e6f0541cd2f11aff6fb73a8a2753fa69756df7b9cfe029
DATE: 2025-12-01
*/
#pragma once
#define FC_TARGET_MCU STM32H743
#define BOARD_NAME AXISFLYINGH743MINI
#define MANUFACTURER_ID AXFL
#define USE_ACC
#define USE_ACC_SPI_ICM42688P
#define USE_GYRO
#define USE_GYRO_SPI_ICM42688P
#define USE_FLASH
#define USE_FLASH_PY25Q128HA
#define USE_BARO
#define USE_BARO_DPS310
#define USE_MAX7456
#define USE_GYRO_CLKIN
#define BEEPER_PIN PA15
#define MOTOR1_PIN PC6
#define MOTOR2_PIN PC7
#define MOTOR3_PIN PC8
#define MOTOR4_PIN PC9
#define LED_STRIP_PIN PE5
#define UART1_TX_PIN PB6
#define UART2_TX_PIN PA2
#define UART3_TX_PIN PD8
#define UART4_TX_PIN PA0
#define UART8_TX_PIN PE1
#define UART1_RX_PIN PB7
#define UART2_RX_PIN PA3
#define UART3_RX_PIN PD9
#define UART4_RX_PIN PA1
#define UART7_RX_PIN PA8 // ESC TELEMETRY
#define UART8_RX_PIN PE0
#define I2C1_SCL_PIN PB8
#define I2C1_SDA_PIN PB9
#define I2C2_SCL_PIN PB10
#define I2C2_SDA_PIN PB11
#define SPI1_SCK_PIN PA5
#define SPI1_SDI_PIN PA6
#define SPI1_SDO_PIN PA7
#define SPI2_SCK_PIN PB13
#define SPI2_SDI_PIN PB14
#define SPI2_SDO_PIN PB15
#define SPI3_SCK_PIN PC10
#define SPI3_SDI_PIN PC11
#define SPI3_SDO_PIN PC12
#define ADC_VBAT_PIN PC0
#define ADC_CURR_PIN PC1
#define LED0_PIN PD3
#define PINIO1_PIN PE2
#define GYRO_1_CS_PIN PC4
#define GYRO_1_EXTI_PIN PA4
#define GYRO_1_CLKIN_PIN PB0
#define MAX7456_SPI_CS_PIN PB12
#define FLASH_CS_PIN PA9
#define TIMER_PIN_MAPPING \
TIMER_PIN_MAP( 0, MOTOR1_PIN, 2, 0) /* PC6 TIM8_CH1 */ \
TIMER_PIN_MAP( 1, MOTOR2_PIN, 2, 1) /* PC7 TIM8_CH2 */ \
TIMER_PIN_MAP( 2, MOTOR3_PIN, 2, 2) /* PC8 TIM8_CH3 */ \
TIMER_PIN_MAP( 3, MOTOR4_PIN, 2, 3) /* PC9 TIM8_CH4 */ \
TIMER_PIN_MAP( 4, LED_STRIP_PIN, 1, 4) /* PE5 TIM15_CH1 */ \
TIMER_PIN_MAP( 5, GYRO_1_CLKIN_PIN, 2, -1) /* PB0 TIM3_CH3 */ \
TIMER_PIN_MAP( 6, BEEPER_PIN, 1, -1) /* PA15 TIM2_CH1 */
#define ADC1_DMA_OPT 7
#define ADC3_DMA_OPT 8
#define TIMUP8_DMA_OPT 9
#ifdef USE_GPS
#define GPS_UART SERIAL_PORT_USART8
#endif
#define SERIALRX_UART SERIAL_PORT_UART4
#define ESC_SENSOR_UART SERIAL_PORT_USART7
#ifdef USE_OSD_HD
#define MSP_DISPLAYPORT_UART SERIAL_PORT_USART1
#endif
#define MAG_I2C_INSTANCE I2CDEV_1
#define BARO_I2C_INSTANCE I2CDEV_2
#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
#define BEEPER_INVERTED
#define GYRO_1_SPI_INSTANCE SPI1
#define GYRO_1_ALIGN CW0_DEG
#define MAX7456_SPI_INSTANCE SPI2
#define FLASH_SPI_INSTANCE SPI3
#define PINIO1_BOX 40
#define PINIO1_CONFIG 129
#define BOX_USER1_NAME "VTX PWR"