/*
* This file is part of Betaflight.
*
* Betaflight is free software. You can redistribute this software
* and/or modify this software under the terms of the GNU General
* Public License as published by the Free Software Foundation,
* either version 3 of the License, or (at your option) any later
* version.
*
* Betaflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this software.
*
* If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define FC_TARGET_MCU STM32F411
#define BOARD_NAME EMAX_BABYHAWK_II_HD
#define MANUFACTURER_ID EMAX
#define USE_GYRO
#define USE_GYRO_SPI_MPU6000
#define USE_ACC
#define USE_ACC_SPI_MPU6000
#define USE_ACCGYRO_BMI270
#define USE_GYRO_SPI_ICM20689
#define USE_ACC_SPI_ICM20689
#define USE_ACC_SPI_ICM42688P
#define USE_GYRO_SPI_ICM42688P
#define USE_FLASH
#define USE_FLASH_M25P16
#define USE_FLASH_W25M512
#define USE_MAX7456
#define BEEPER_PIN PC14
#define MOTOR1_PIN PA8
#define MOTOR2_PIN PA9
#define MOTOR3_PIN PA10
#define MOTOR4_PIN PB0
#define MOTOR5_PIN PB4
#define RX_PPM_PIN PA3
#define RX_PWM1_PIN PA2
#define LED_STRIP_PIN PA15
#define UART1_TX_PIN PB6
#define UART2_TX_PIN PA2
#define UART1_RX_PIN PB7
#define UART2_RX_PIN PA3
#define LED0_PIN PC13
#define SPI1_SCK_PIN PA5
#define SPI2_SCK_PIN PB13
#define SPI1_SDI_PIN PA6
#define SPI2_SDI_PIN PB14
#define SPI1_SDO_PIN PA7
#define SPI2_SDO_PIN PB15
#define CAMERA_CONTROL_PIN PB10
#define ADC_VBAT_PIN PA0
#define ADC_RSSI_PIN PB1
#define ADC_CURR_PIN PA1
#define PINIO1_PIN PB5
#define FLASH_CS_PIN PB2
#define MAX7456_SPI_CS_PIN PB12
#define GYRO_1_EXTI_PIN PB3
#define GYRO_1_CS_PIN PA4
#define USB_DETECT_PIN PC15
#define TIMER_PIN_MAPPING \
TIMER_PIN_MAP( 1, PA8 , 1, 1) \
TIMER_PIN_MAP( 2, PA9 , 1, 1) \
TIMER_PIN_MAP( 3, PA10, 1, 1) \
TIMER_PIN_MAP( 4, PB0 , 2, 0) \
TIMER_PIN_MAP( 5, PB4 , 1, 0) \
TIMER_PIN_MAP( 6, PA3 , 2, -1) \
TIMER_PIN_MAP( 7, PB10, 1, -1) \
TIMER_PIN_MAP( 8, PA15, 1, 0)
#define ADC1_DMA_OPT 1
#define ADC_INSTANCE ADC1
#define DEFAULT_DSHOT_BURST DSHOT_DMAR_OFF
#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_OFF
#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
#define DEFAULT_CURRENT_METER_SCALE 179
#define BEEPER_INVERTED
#define SYSTEM_HSE_MHZ 8
#define MAX7456_SPI_INSTANCE SPI2
#define FLASH_SPI_INSTANCE SPI2
#define GYRO_1_SPI_INSTANCE SPI1
#define GYRO_1_ALIGN CW180_DEG
#define GYRO_2_SPI_INSTANCE SPI1