/*
* This file is part of Betaflight.
*
* Betaflight is free software. You can redistribute this software
* and/or modify this software under the terms of the GNU General
* Public License as published by the Free Software Foundation,
* either version 3 of the License, or (at your option) any later
* version.
*
* Betaflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this software.
*
* If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define FC_TARGET_MCU STM32F405
#define BOARD_NAME F4BY
#define MANUFACTURER_ID FOSS
#define USE_GYRO
#define USE_GYRO_SPI_MPU6000
#define USE_ACC
#define USE_ACC_SPI_MPU6000
#define USE_BARO_MS5611
#define USE_SDCARD
#define BEEPER_PIN PE5
#define MOTOR1_PIN PA0
#define MOTOR2_PIN PA1
#define MOTOR3_PIN PA2
#define MOTOR4_PIN PA3
#define MOTOR5_PIN PE9
#define MOTOR6_PIN PE11
#define MOTOR7_PIN PE13
#define MOTOR8_PIN PE14
#define RX_PWM1_PIN PC9
#define RX_PWM2_PIN PC8
#define RX_PWM3_PIN PC6
#define RX_PWM4_PIN PC7
#define RX_PWM5_PIN PD15
#define RX_PWM6_PIN PD14
#define RX_PWM7_PIN PD13
#define RX_PWM8_PIN PD12
#define UART1_TX_PIN PB6
#define UART2_TX_PIN PD5
#define UART3_TX_PIN PD8
#define UART4_TX_PIN PC10
#define UART6_TX_PIN PC6
#define UART1_RX_PIN PB7
#define UART2_RX_PIN PD6
#define UART3_RX_PIN PD9
#define UART4_RX_PIN PC11
#define UART6_RX_PIN PC7
#define INVERTER_PIN_UART6 PD3
#define I2C2_SCL_PIN PB10
#define I2C2_SDA_PIN PB11
#define LED0_PIN PE3
#define LED1_PIN PE2
#define LED2_PIN PE1
#define SPI1_SCK_PIN PA5
#define SPI2_SCK_PIN PB13
#define SPI3_SCK_PIN PB3
#define SPI1_SDI_PIN PA6
#define SPI2_SDI_PIN PB14
#define SPI3_SDI_PIN PB4
#define SPI1_SDO_PIN PA7
#define SPI2_SDO_PIN PB15
#define SPI3_SDO_PIN PB5
#define ESCSERIAL_PIN PA0
#define ADC_VBAT_PIN PC3
#define ADC_RSSI_PIN PC1
#define ADC_CURR_PIN PC2
#define SDCARD_SPI_CS_PIN PE15
#define GYRO_1_EXTI_PIN PB0
#define GYRO_1_CS_PIN PA4
#define USB_DETECT_PIN PA9
#define TIMER_PIN_MAPPING \
TIMER_PIN_MAP( 0, PC9 , 1, 0) \
TIMER_PIN_MAP( 1, PC8 , 1, 0) \
TIMER_PIN_MAP( 2, PC6 , 1, 0) \
TIMER_PIN_MAP( 3, PC7 , 1, 0) \
TIMER_PIN_MAP( 4, PD15, 1, -1) \
TIMER_PIN_MAP( 5, PD14, 1, 0) \
TIMER_PIN_MAP( 6, PD13, 1, 0) \
TIMER_PIN_MAP( 7, PD12, 1, 0) \
TIMER_PIN_MAP( 8, PA0 , 1, 0) \
TIMER_PIN_MAP( 9, PA1 , 1, 0) \
TIMER_PIN_MAP(10, PA2 , 2, 0) \
TIMER_PIN_MAP(11, PA3 , 2, 0) \
TIMER_PIN_MAP(12, PE9 , 1, 0) \
TIMER_PIN_MAP(13, PE11, 1, 0) \
TIMER_PIN_MAP(14, PE13, 1, 0) \
TIMER_PIN_MAP(15, PE14, 1, 0) \
TIMER_PIN_MAP(16, PE6 , 1, -1)
#define SPI2_TX_DMA_OPT 0
#define ADC1_DMA_OPT 1
#define MAG_I2C_INSTANCE I2CDEV_2
#define USE_BARO
#define BARO_I2C_INSTANCE I2CDEV_2
#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_SDCARD
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
#define USE_SDCARD_SPI
#define SDCARD_SPI_INSTANCE SPI2
#define SYSTEM_HSE_MHZ 8
#define DASHBOARD_I2C_INSTANCE I2CDEV_2
#define GYRO_1_SPI_INSTANCE SPI1
#define GYRO_1_ALIGN CW90_DEG