/*
* This file is part of Betaflight.
*
* Betaflight is free software. You can redistribute this software
* and/or modify this software under the terms of the GNU General
* Public License as published by the Free Software Foundation,
* either version 3 of the License, or (at your option) any later
* version.
*
* Betaflight is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this software.
*
* If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define FC_TARGET_MCU STM32F405
#define BOARD_NAME KAKUTEF4
#define MANUFACTURER_ID HBRO
#define USE_ACC
#define USE_ACC_SPI_MPU6000
#define USE_GYRO
#define USE_GYRO_SPI_MPU6000
#define USE_GYRO_SPI_ICM20689
#define USE_ACC_SPI_ICM20689
#define USE_FLASH
#define USE_FLASH_W25Q128FV
#define USE_MAX7456
#define BEEPER_PIN PC9
#define MOTOR1_PIN PB0
#define MOTOR2_PIN PB1
#define MOTOR3_PIN PA3
#define MOTOR4_PIN PA2
#define MOTOR5_PIN PA0
#define MOTOR6_PIN PC8
#define RX_PPM_PIN PC7
#define LED_STRIP_PIN PA1
#define UART1_TX_PIN PA9
#define UART3_TX_PIN PB10
#define UART6_TX_PIN PC6
#define UART1_RX_PIN PA10
#define UART3_RX_PIN PB11
#define UART6_RX_PIN PC7
#define INVERTER_PIN_UART3 PB15
#define LED0_PIN PB5
#define LED1_PIN PB4
#define LED2_PIN PB6
#define SPI1_SCK_PIN PA5
#define SPI3_SCK_PIN PC10
#define SPI1_SDI_PIN PA6
#define SPI3_SDI_PIN PC11
#define SPI1_SDO_PIN PA7
#define SPI3_SDO_PIN PC12
#define ESCSERIAL_PIN PC7
#define ADC_VBAT_PIN PC3
#define ADC_RSSI_PIN PC1
#define ADC_CURR_PIN PC2
#define FLASH_CS_PIN PB3
#define MAX7456_SPI_CS_PIN PB14
#define GYRO_1_EXTI_PIN PC5
#define GYRO_1_CS_PIN PC4
#define USB_DETECT_PIN PA8
#define TIMER_PIN_MAPPING \
TIMER_PIN_MAP( 0, RX_PPM_PIN, 2, -1) \
TIMER_PIN_MAP( 1, MOTOR1_PIN, 2, 0) \
TIMER_PIN_MAP( 2, MOTOR2_PIN, 2, 0) \
TIMER_PIN_MAP( 3, MOTOR3_PIN, 1, 1) \
TIMER_PIN_MAP( 4, MOTOR4_PIN, 1, 0) \
TIMER_PIN_MAP( 5, MOTOR5_PIN, 2, 0) \
TIMER_PIN_MAP( 6, MOTOR6_PIN, 2, 1) \
TIMER_PIN_MAP( 7, LED_STRIP_PIN, 2, 0)
#define ADC1_DMA_OPT 0
#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
#define DEFAULT_CURRENT_METER_SCALE 275
#define BEEPER_INVERTED
#define SYSTEM_HSE_MHZ 8
#define MAX7456_SPI_INSTANCE SPI3
//TODO #define MAX7456_PREINIT_OPU ON
#define FLASH_SPI_INSTANCE SPI3
#define GYRO_1_SPI_INSTANCE SPI1
#define GYRO_1_ALIGN CW270_DEG